Targets

We have a range of plasma and LCD friendly IR targets

IR 60S/K

  • Miniture stick on target, ideal for stealth installation
  • Available in both silver and black
  • Terminates in 3.5mm plug for easy connection to IR-C240
  • Also supplied with connecting strip to allow longer length cable extension
  • 12V DC system operation for use with KORDZ® IR repeater system compatible with other common 12V systems such as Xantech®
  • Narrow bandwidth 30-100kHz with proprietary DSP IC for greatly reduced noise interference
  • Use with KC-J8 structured wiring junction box for the connection of multiple repeaters to a single IR-C240 connecting block
  • The mini targets are very small at 10mm wide, 8mm deep and just over 50mm long.

black $130.00 each

silver $130.00 each

IR 70C

  • Wall Plate Digital IR Target
  • 12V DC system operation for use with KORDZ® IR repeater system compatible with other common 12V systems such as Xantech®
  • Narrow bandwidth 30-100kHz with proprietary DSP IC for greatly reduced noise interference
  • Power STATUS compatibility
  • Clipsal® 2000 styled wall plate design (non-genuine)
  • Use with KC-J8 structured wiring junction box for the connection of multiple repeaters to a single IR-C4 connecting block

$89.00 each

IR 30

  • Brass Tube Digital IR Target
  • 12V DC system operation for use with KORDZ® IR repeater system compatible with other common 12V systems such as Xantech®
  • Narrow bandwidth 30-100kHz with proprietary DSP IC for greatly reduced noise interference - CFL friendly
  • 1/2" mounting hole required - removable front cap; 2 supplied - natural brass (as shown), and white colour
  • Use with KC-J8 structured wiring junction box for the connection of multiple repeaters to a single IR-C4 connecting block
  • Measures just 52mm deep, head is 13mm and shaft is 11mm

$107.00 each

IR 80

  • Table Top Digital IR Target
  • 12V DC system operation for use with KORDZ® IR repeater system compatible with other common 12V systems such as Xantech®
  • Terminates in 3.5mm plug for easy connection to IR-C240
  • Also supplied with connecting strip to allow longer length cable extension
  • Narrow bandwidth 30-100kHz with proprietary DSP IC for greatly reduced noise interference
  • Use with KC-J8 structured wiring junction box for the connection of multiple repeaters to a single IR-C4 connecting block

$152.00 each